Part Number
M75-R2430-BW32
24 x 30" Flasher RingWhite
24 X 30"
Summary
Designed to LED enhance any existing or new R2-1 Regulatory Speed Limit Sign. Flashing Speed Limit Signs can flash 24/7 or, when equipped with radar sensors, can flash when vehicles exceed the posted speed limit. Both options typically slow speeding drivers.
Specifications
ILLUMINATION
- LED Configuration
- LEDs configured in clusters of three within the border around perimeter of sign for enhanced brightness (fully MUTCD compliant design)
- LED Pitch
- .375 in (.95 cm) (on center)
- Cluster Pitch
- 1.9” (4.8cm)
- Color and Viewing Angle
- White LEDs with 30 ° Viewing Angle, InGaN chemistry, and supports EN12966-1 white color class C2
- LED Lifetime
- LEDs rated lifetime of 100,000 hours
CONSTRUCTION
- Construction
- 14 gauge 5052 aluminum construction
- Individually Lensed LEDs
- Individually lensed LEDs recessed behind faceplate
- Wiring
- All Wiring is UL 2464 rated
ENVIRONMENTAL
- Enclosure
- NEMA 4X Enclosure
- Potted Electronics
- Epoxy-potted electronics (hermetically sealed)
- Operating Range
- -29.2° F to 165.2° F operating range(-34° C to +74° C)
COMPATIBILITY
- Trafficalm Compatibility
- Any TraffiCalm Flashing Sign System Controller or Collaborator, including radar-activated systems.
- Compatibility
- TraffiCalm iQ1200 and iQ1800 Radar Speed
Signs with integrated “beacon” output.
WARRANTY AND SERVICE
- Warranty
- 5-year limited warranty, 1-year on batteries
- Technical Support
- Unlimited tech support from US based
factory technicians
PHYSICAL DESCRIPTIONS
- Size
- 24” x 30” (61 cm x 76.2 cm)
- Retrofitting
- Retrofits to any existing Speed Limit Sign manufactured to MUTCD requirements of corresponding size
- Installation
- All LED hardware mounted within the black border of the sign. Shipped with 3M VHB adhesive backing and self-tapping screws for retrofit installation. If installed on a static sign at the factory, then installed with 3M VHB adhesive backing and rivets.
- MUTCD Compliance
- MUTCD compliant LED placement and usage
- Cable Extension
- 10 ft (3 m) single cable extension to reach Controller
- Factory Installation
- Ring can be factory installed to a new static sign, per the available part numbers
- Shipping
- This item can come as a retrofit kit (solar or AC controller, radar, and LED flashing ring) OR a
complete system with static speed limit sign
System Description
- System Description
- A complete LED Flashing Speed Limit Sign System consists of a TraffiCalm Controller, an LED Flashing Ring, a static retroreflective SPEED LIMIT Sign, an optional Smart Radar Sensor, and poles/posts.
- Installation
- As with all TraffiCalm® products, retrofit installation utilizes the existing sign and post to minimize costs and construction time. Optional retroreflective speed limit signs with factory-installed LED rings are available.
LED Flashing Rings
Yield
Chevron
Rectangle
School Zone
Warning
Stop
Railroad
M75-R3030-BA44
30" Railroad Crossing Advanced Warning PlateAmber
Factory installed to W10-1 Static Sign
-
M75-R3636-BA44
36" Railroad Crossing Advanced Warning PlateAmber
Factory installed to W10-1 Static Sign
-
M75-R4848-BA44
48" Railroad Crossing Advanced Warning PlateAmber
Factory installed to W10-1 Static Sign
