Skip to main content
Part Number

M75-SA300-B242

Speed Compliance System with 20 Watt SolarWhite

12 Ah AGM Battery, 24" X 30" LED Flasher Ring & Radar
24" X 30"
Summary

Radar Speed Signs have become the industry go to for discreetly suggesting driver behavior and slowing violators to a reasonable speed. With radar activation, our Speed Compliance System represents a new generation of affordable yet effective ways to convey a clear message to drivers and draw straightforward attention to the posted speed limit with our Speed Compliance System. Engineered to provide ease of installation, unmistakable visibility under any conditions, and intuitive driver calming beyond that of just reflective sheeting.

Specifications

ILLUMINATION

LED Configuration
LEDs configured in clusters of three within the border around perimeter of sign for enhanced brightness, (fully MUTCD compliant design)
LED Pitch within Cluster
.38” (1 cm)
Cluster Pitch
1.9” (4.8cm)
Color and Viewing Angle
White LEDs with 30 ° Viewing Angle

CONSTRUCTION

Construction
4 gauge 5052 aluminum construction
Individually Lensed LEDs
Individually lensed LEDs recessed behind faceplate
Ring Depth
0.4” (10.2 mm) to minimize impact on natural sign appearance
Cabling
No mounting or wiring exposed on reverse
of sign

ENVIRONMENTAL

Enclosure
NEMA 4X Enclosure
Potted Electronics
Potted electronics (hermetically sealed)
Operating Range
-34° C to + 60° C (-29° F to +140° F)

WARRANTY AND SERVICE

Warranty
5 year limited warranty, 1 year on batteries
Tech Support
Unlimited tech support from US based factory
technicians

PHYSICAL DESCRIPTION

Size
24” x 30” (61 cm x 76.2 cm)
Retrofitting
Retrofits to any existing Speed Limit Sign manufactured to MUTCD requirements of corresponding size
Mounting
All LED hardware mounted within the black border of the sign. Mounted either with adhesive backing or included self tapping screws. Rivets may be utilized to improve tamper resistance
MUTCD Compliance
MUTCD compliant LED placement and usage
Cable Extension
10 ft (3 m) single cable extension to reach Controller
Installation
Ring can be factory installed to a new static sign, per the available part numbers shown below
Shipping
This item can come as a retrofit kit (solar or AC controller, radar, and LED flashing ring) OR a complete system with static speed limit sign

SYSTEM DESCRIPTION

Speed Compliance System
Our Speed Compliance System consists of a TraffiCalm® Controller, a radar sensor, and a 24"x30" or 36"x48" TraffiCalm® Flashing LED Ring. This inexpensive approach to driver feedback provides a highly ergonomic awareness of the existing R2-1 Speed Limit sign.
Installation
As with all TraffiCalm® products, retrofit installation utilizes the existing sign and post to minimize costs and construction time. Optional retroreflective speed limit signs with factory installed LED rings are available.
  • 24" X 30"
    M75-SA300-B242

    Speed Compliance System with 20 Watt SolarWhite

    12 Ah AGM Battery, 24" X 30" LED Flasher Ring & Radar

  • 24" X 30"
    M75-SA300-B243

    Speed Compliance System with 30 Watt SolarWhite

    12 Ah AGM Battery, 24" X 30" LED Flasher Ring & Radar

  • 36" X 48"
    M75-SA300-B362

    Speed Compliance System with 20 Watt SolarWhite

    12 Ah AGM Battery, 36" X 48" LED Flasher Ring & Radar

  • 36" X 48"
    M75-SA300-B363

    Speed Compliance System with 30 Watt SolarWhite

    36" X 48" LED Flasher Ring, 12 Ah AGM Battery, Houston Radar

Back-Lit

  • M75-48360-BL00

    48"x 36" Back-Lit SignRed Wrong Way

    Internally Illuminiated

Push Buttons

  • M75-INX9W-N0Y0

    Polara INX Audible Push Button

    Includes Arrow Button, Cable, and Jumper

RRFB

School Zone

Wrong Way Warning +Notification

Wrong Way Controllers

  • M75-WWCTL-C48E

    W-Series Wrong Way Controller with Modem

    10 Year Cell Service Required

  • M75-WWCTL-F48E

    W-Series Wrong Way Controller with Fiber Modem

    10 Year Cell Service Required